"The world of biological medicine is very slow to recognize that, instead of just cutting out diseased tissue, one can inject energy towards the effected cells and entrain them back into healthy states.  So just as our beliefs can effect cellular function and DNA processes, so too can energy." 
--Bruce Lipton

Bruce H. Lipton, Ph.D. is a cellular biologist, author, and former Associate Professor at the University of Wisconsin’s School of Medicine. Lipton's research on mechanisms controlling cell behavior employed cloned human muscle cells. In addition, he lectured in Cell Biology, Histology and Embryology. Bruce resigned his tenured position to pursue independent research integrating quantum physics with cell biology. His breakthrough studies on the cell membrane, the "skin" of the cell, revealed that the behavior and health of the cell was controlled by the environment, findings that were in direct contrast with prevailing dogma that life is controlled by genes. Lipton returned to academia as a Research Fellow at Stanford University's School of Medicine to test his hypotheses (1987-1992). His ideas concerning environmental control were substantiated in two major scientific publications. The new research reveals the biochemical pathways connecting the mind and body and provides insight into the molecular basis of consciousness and the future of human evolution, and presaged the revolutionary field of Epigenetics, the new science of how environment and perception control genes.

Product Development

Development of the The Violet Ray Crystal Resonator (VRCR) has spanned 22 years and is continuing today. It has seen many improvements over the years in its development and design. My original design was focused on generating sound energy that would electronically charge the body with healing energy. However, it quickly became clear that the violet spectrum of color contained all other colors and healing frequencies, and incorporating the St. Germain Violet Ray became the ultimate development goal.

Initial Design 1986

The first prototype of the VRCR was called the Crystal Resonator (CR). At this point in time, the instrument could not generate the violet ray, but would transmit sound energy into the body as well as electronically charge the body, and I could measure its effects at any point on the body by using a standard Radio Shack sound level meter. The maximum sound energy output of the CR was 85 decibels.

The Coil
One of the first things that I learned about the violet ray was that it was produced in the visible spectrum by a frequency of some 753 trillion hertz, or cycles per seconds. I knew of no electronic circuit, gated or switched, that could produce that frequency, but also knew that a Tesla Coil could generate it. However, in researching the literature I found that everything Tesla worked with was much larger and more powerful than what I needed. In addition, the outward radiation from a regular Tesla coil would interfere with the internal circuitry of the CR itself. The energy radiated from a regular Tesla coil goes straight up out of the top of the coil. I wondered if a small coil could actually be made that (1) could produce the high voltage output I needed, (2) could `fire' a bulb, and (3) could work off of a tiny battery?

The output of the secondary portion of the Tesla-type coil that I created is an alternating frequency, or more precisely a pulsed AC, of high voltage estimated to be 80,000 volts. This functions as a carrier wave, similar to the well-known carrier wave of a radio frequency (RF) generator. Four discrete bands -- arbitrarily designated red, green, blue and violet -- of modulating frequencies are utilized, with the modulating circuitry capable of selecting any frequency between zero and approximately 35,000 hertz. Imposing the modulating frequency on the so-called carrier wave produces a considerable number of harmonics and sub-harmonics. Later on, a "White light" band would be added to allow a frequency doubling.

One of the things I encountered is extremely interesting. I had the primary coil and the secondary coil wound and assembled. I put the assembled coil in the circuit and turned on the power. And behold, a tiny yellow spark jumped the air gap. This was not the color I wanted. What to do? I wound another bobbin with more turns. With this new coil installed in the circuit, the power was turned on. This time a Green spark jumped the gap. I wound another bobbin with more turns and tested it. This time, a Violet spark jumped the gap. Eureka! I had finally produced the violet flame! The realization that I had been instrumental in the creation of a Violet Flame coil completely overwhelmed me.

The Violet Ray
After testing the output of various models of the original Violet Ray Machine designed by Edgar Cayce decades ago, I was surprised to discover that on the lowest setting, the machine measured off the scale at over 120 decibels on my sound level meter, equivalent to the noise level at ten feet behind a jet engine running at full power! It didn't take long to realize that such a sound level is far too powerful for the human body and could cause shock, pain and other adverse effects.

I have since discovered that the energy radiated by a small, modified Tesla Coil implodes inward towards the center of the coil and then travels along the wire lead connecting the output jack to treatment devices, with very high amperage and exceedingly low voltage. This creates a stable, safe environment for application to the human body and environment.

Crystal Wand
Needing an effective electrode that would safely transmit the frequencies of the CR in a usable form for the human body and energy envelope, I developed the crystal wand. After placing crystals within the glass tube, a saline solution made from distilled water and sun-dried sea salt was added. I also added castor oil, to help "band" molecules. Atomidine was also added to the saline solution, based on the Edgar Cayce formula, with the understanding that this changes the atomic structure of the water to make it more conductive to different types of energies moving through it. The resultant energy radiated out of the crystal wand can be detected by an ordinary, inexpensive oscilloscope and will cause a small neon bulb to glow. This indicated that a portion of such radiated energy is electromagnetic.

At this stage of the VRCR development, other types of energies were being radiated from the crystal wand:

(1) an energy somewhat similar in propagation characteristics to electromagnetic energy but having different interactive effects upon impinging objects and incapable of being detected by present-day instrumentation.

(2) sound energy, both audible and ultra.

(3) other energies, such as electromagnetic, magnetic, color, crystal and cosmic.

Two Modes of Early Operation

By now I had given my instrument the name of Violet Ray Crystal Resonator (VRCR) and began testing it in two different modes:

First mode
A crystal wand was connected to the high voltage output jack. With the VRCR set to the desired frequency band and modulation frequency, the person using or operating the VRCR would place the crystal wand adjacent to a body location and the VRCR would be turned on. Or, if the balance or imbalance of a person's energy centers were to be checked, that person would hold the crystal wand in one hand while the operator would move the sound level meter to the various locations to make the required measurements.

Second mode and the Violet Ray Bulb
This mode of operation was somewhat different. I knew I had to find a suitable way to pulse modulated violet ray energy into the body. To accomplish that objective, I developed a violet ray wand which would "FIRE" or glow (via a bulb) when connected between the high voltage output jack of the VRCR and the jugular vein on the neck. At the same time, a crystal wand was connected to the low voltage output jack and placed adjacent to the Spleen. It is my understanding that the firing of the violet ray bulb modulates the pulsating energy flowing out of the VRCR and irradiates the blood flowing through the vein, thus potentially destroying viruses or bacteria in the blood. I make no medical claims here, but simply raise the unproven possibility that viruses and bacteria can be completely destroyed using correct frequencies! This second mode was also used to stimulate the various electronic acupuncture points.

The primary use of this initial model of the violet ray crystal resonator was to balance the energy flow into and out of the seven major energy centers of the body, and to correct any energy flow imbalances at various other locations on the body. A additional improvement extended the number of energy centers being measured and balanced to thirteen.

Design Improvements 1988-1991

During the next two and one-half years I continued to make improvements to the VRCR, improvements which not only increased the efficiency of body/energy alignments, but also gave additional capability and versatility in the use of the VRCR:

Single Terminated, Clear Quartz Crystals
A pair of single-terminated, quartz crystals were added to the input circuitry. These crystals were positioned so that the two termination points were placed at 90 degrees to each other, one acting as a control crystal and the other a power crystal. The addition of these crystals considerably increased the VRCR's sensitivity for detecting and responding to the operator's thoughts, as well as the sending of those thought energies through the VRCR circuitry and out to the glass electrode. When this happens, the crystals in the glass electrode react to the thought energy radiating upon them and re-radiate that thought energy, slightly modified, back out to the body as healing energy.

Light Emitting Diodes (LEDs)
The next step was the addition of red and green LED'S to the input circuitry. The red LED was connected to the control crystal and the green LED was connected to the power crystal. It is my understanding and the addition of color to the circuitry made the radiating output of the glass electrode more compatible with the electromagnetic envelope of the human body. Color has played an important part in methods of bodily energy alignment that are more than a century old, and color has been associated with the energy centers of the human body for hundreds if not thousands of years.

Quartz Injector Crystal
A large crystal was the next addition to the VRCR input circuitry. One end of this single-terminated quartz crystal, the end opposite the termination end, was ground to form a level, flat surface. To accommodate this new addition, the control and power crystals were re-positioned horizontally, facing each other in a straight-line alignment with their termination points touching. Then the injector crystal was positioned vertically at ninety degrees to the other two crystals with the termination point of the injector crystal touching, or almost touching, the termination points of the other two crystals. Thus was formed a crystal trinity that I called the "array transducer." The addition of the Injector Crystal allows the VRCR to act as a radionics transmitter: one can formulate a thought, concentrate on it, place their hand on top the flat surface of the injector crystal and turn on the VRCR, or if it is desired to have the energy from a particular reagent or object transmitted through the VRCR, then that reagent or object should be placed on top of the flat surface of the injector crystal.

Yellow LED
The next step was the addition of a yellow LED. This yellow LED was connected to the control crystal with the red LED now connected to the injector crystal and the green LED connected to the power crystal. This makes the output of the VRCR even more compatible with the human body and it's energy centers. When one wants to receive the greatest benefit from the color energy transmitting capabilities of the VRCR, they can lie down flat on their back and place the VRCR on their chest, with the back of the VRCR facing them so that they can see the colored LEDs through the transparent back panel of the VRCR. One can then turn on the VRCR and concentrate on receiving the color they believe is most needed. The flow of energy is from red to yellow to green, and as one looks at the crystals with their respective LEDs, either visibly blinking or appearing as solid colors, they are receiving the benefits of pulsating colors plus color harmonics and sub-harmonics.

Golden Triad Antenna
The next addition was the golden triad antenna. In a dream experience I was taken back through time to an ancient culture in an area that is now Bolivia. I noticed that everyone was wearing a hat with a particular symbol made of some kind of metal on top. When I asked what this was, I was told that mankind had once been able to receive high frequency spiritual energy directly from GOD, without needing interpretation or transformation. There then came a time that mankind fell from grace and could no longer receive these high frequency GOD energies as a collective whole. The human electromagnetic energy is likened to a DC pulsed current or half wave AC current. Where as pure universal GOD consciousness energy is more like full wave AC current. To receive and "let in" these energies, our higher energy centers translate GOD energies from AC into pulsed DC in a step down process. The triad symbol on top the violet ray crystal resonator is part of an antenna system that does the same thing. So in this ancient culture, this symbol was placed on the top of the hat and worn by its citizens to act as a step down transformer that converted “full wave” God energies to “half wave” that the people could receive and let in. It was a way of staying in touch with divine intelligence. In the dream experience I was instructed to make an antenna in the form of this ancient symbol. I then added germanium diodes and amethyst crystals to adapt the signals coming and going through the golden triad antenna to the electronics of the VRCR.

The White Light Circuit
The white light circuit,WLC, evolved from a rather unusual beginning. In looking for a way to amplify the power of prayer and the spoken word (or invocation and or prayer), as well as transmit healing and Transformative energies (radionic healing) throughout the physical/etheric bodies of the earth, a fellow research scientist began experimenting with the first model of the VRCR. During his research, this scientist discovered that if the modulation frequency of the VRCR were increased approximately five times this would give him the results he wanted.

As a result, I developed an initial version of the white light circuit to meet this increased modulation requirement. Through the process of developing the white light circuit, I discovered that there are actually sixteen major energy centers involved in the stepping-down of the GOD energies coming from the spiritual triad. From ancient times seven major energy centers, or “chakras” are mentioned in literature and writings. The development process of the VRCR has shown me that there are an additional nine more centers, some located within the energy envelope that surrounds each person. For optimum physical, emotional, mental, etheric and spiritual health, these sixteen centers of energy should be balanced and vibrating in harmony with the basic frequency of the earth, measured as the “Schuman Resonance”

The Schuman Resonance
Since 1952, science has measured a frequency named the "Schuman Frequency" that is the electromagnetic pulse between the earth and the ionosphere. This is actually a set of frequencies of which the strongest and fundamental is measured at 7.83Hz. with only small variations due to changes in global temperature, night/day effects of the sun and perhaps the number of lightning strikes on the planet in any given second effecting the amplitude of the Schumann Resonant frequencies. There are roughly 100 lightning strikes per second globally with a typical current flow of 20,000 amperes. That comes to 2 million amps/second! That is a lot of energy. But the overall energy of the Schumann Resonance is 4 to 6 orders smaller than other electrostatic forces in the atmosphere. It is really a very small but important energy field for our health that is often overwhelmed by man made electromagnetic waves and frequencies. Some estimate the Schumann Resonance energy may be 200 to 300 million times less than the man made electromagnetic energy that is found in the typical American living room. Some also say that man made electromagnetism, for that same reason, may be the single most important threat to human health on the planet.

I discovered that the Schuman Resonance was the 5th Octave of the earth's core frequency.  An octave is a doubling of the original frequency. Science knew nothing of the electromagnetic pulse frequency of the earth's inner core and still doesn't. I came to the understanding that the layers of the earth are each an octave or doubling from the core on out. So the inner core resonates at .24468750Hz., the outer core at .4893750Hz., the inner mantle at .978750Hz., the outer mantle at 1.95750Hz., the crust at 3.9150Hz. and finally the earth's surface and Ionosphere (out to about 80Km,) at the Schumann Frequency of 7.83Hz. 

The human body is similar to the earth in that it also has an electromagnetic field that operates in resonance with the earth unless pulled out of resonance by man made electromagnetic fields.  Just like the earth, each energy center of the human energy system doubles in frequency from the center below it when properly tuned and balanced . This follows the laws of resonance starting at our "earth" energy center frequency of 3.9150Hz. (rounded to 4) all the way through the 16th "heaven" energy center, each energy center doubles in frequency, as a resonant octave of the one below. There is one exception. The "Imagination" and "I Am" energy centers are both currently resonating at 16,035.84Hz.

Moldavite Crystal
The next steps in the VRCR's evolution occurred almost simultaneously. A small Moldavite crystal was placed at the junction of the injector, control and power crystals, adding an additional frequency to the transmission of the VRCR.

Diffuser
A diffuser was then added, similar to a diffraction grating, that greatly enhances the effectiveness of the impact of the colored lights upon the viewer.  As the golden triad is an antenna of energy, so is the diffuser magnifier an antenna of light energy. The diffuser separates and focuses the light energy on the object placed in its path. That energy which is needed will be absorbed and that which is not needed will be reflected. The diffuser diffuses infra-red and ultra-violet energy as well as visible light energy.

The Crystallized Coil
I then added a crystal varnish, by mixing finely ground clear quartz crystal with two types of varnish: a standard varnish and an air drying or baking varnish. I covered the coil windings with the air drying or baking crystal varnish. Then, after the coil is finished, the entire coil is dipped in the same varnish. It is my understanding from molecular science and quantum physics that this causes the atoms that are in the molecules of the finely ground crystals to align themselves just like in a regular, ungrounded crystal. The induction coil then acts as if it were one, large, solid crystal. Such a crystal can help filter out any frequencies or harmonics that are not compatible with the human body. Also, a non-crystallized coil generates a standing wave which in turn produces a reflected wave. The problem with this is that the reflected wave will tend to cancel out the standing wave and reduce the final output of the secondary coil. The new, crystallized coil also produces a standing wave and resultant reflected wave; however, the alignment of the atoms via the crystal varnish helps to change the phasing of the reflected wave to put it in phase with the standing wave, thus resulting in increased power output. At the same time, the resultant output is smoothed so that any "spikes" are minimized. This also makes for easier absorption by the human energy field. I also used the other crystal varnish on the inside of the VRCR housing, on the backside of the light diffuser and on the crystal board itself.

Permanent Magnets
I then placed small, permanent magnets at key points in the circuitry, to generate a focused magnetic energy field that would draw vibrations from thoughts or substances placed on top of the injector crystal down into the array transducer where the three crystals meet. The control crystal then signals the power crystal what to do.

Additional Enhancements 1994-2009

Base Circuit Board Improvements New for 2008!
We replaced a hand made base circuit board with a manufactured version of our own design to add strength and stability to electronics that are constantly radiated with intense, multi-faceted energies from the modified Tesla Coil.

More Precisely Controlled Crystal Shaping and Dimensions
This has been a function of better technology becoming available that adds to greater stability of operation from unit to unit and increases the precision of frequency control.

Changing Light Colors of LED's
The availability of new technologies has also allowed us to use much stronger light emitting diodes than in the past, adding to the converging energies within the array transducer mini creation point.

Modified Tesla Coil Improvements New for 2009!
With improvements made in available materials and our own design, we are now able to make the coils much more stable, increasing output potential and stable accuracy to new levels.

Integrated Power Supply New for 2008!
To support Coil improvements, provide additional stability to the electronics and increased supply of power, we have upgraded the power supply.

Pyramid Transmission Antenna
It became clear that an antenna was needed to receive and transmit the energies of the VRCR, especially for the unit to effectively block and transform the many harmful and toxic electromagnetic frequencies in our environments. I chose a triangular pyramid design based on research that a three sided pyramid acts as a transmitter, whereas a four sided pyramid acts as a receiver. While the triangular pyramid transmission antenna has been shown to still receive subtle energies, the golden triad antenna atop the VRCR is highly effective in this regard.

Crystal Food Plate Energizer
Desiring for an easy and effective way to charge, transform and restructure food, drink and other substances with the subtle and GOD energies the VRCR channels, I developed the food plate energizer. It is made with a glass plate woven with conductors on the bottom side, painted with quartz crystal dust, baked and then coated with gold paint.

Crystal Wands and Power Cords New for 2009!
Amythest and mixed Crystal Wands and the cords that connect them to the VRCR have been upgraded to make them safer and easier to utilize.

To Top